Trancozinc Epoxy Primer – 150
Two-component primer based on epoxy resin formulated with zinc powder and is suitable for protecting steel structures against corrosion in marine and industrial environments. This product is suitable for surfaces prepared by high pressure water spray and can also be applied to Sa2 and St3 prepared surfaces.
Transozinc Epoxy Primer – 155
Transpoxy Master MiO Primer InterMediate – 165
Two-component primer / intermediate coat based on polyamide epoxy resin containing micaceouse iron oxide (MIO). This product protects the steel structure by making a barrier layer against corrosive agents. The coating has also high impact and abrasion resistance. This product can be applied as a primer or intermediate in all Transocean coating systems.
Transpoxy MIO Coating – 166
Two-component intermediate coat based on fast curing epoxy resin containing micaceouse iron oxide (MIO). This coating is used as an intermediate coat and provides good impact and abrasion resistance. This product can be re-coated with all Transpoxy and Transurethane series.
Transpoxy Uniprimer – 171
This product is based on two-component epoxy resin and provides a good protection against corrosive agents in marine and industrial environments. This coating can be used as a primer on steel or other metal surfaces and can be re-coated with other Transocean products.
Transpoxy Primer – Tiecoat – 116
Two-component primer based on polyamide epoxy resin containing non-toxic pigments and formulated to protect steel structures against marine and industrial corrosive agents. This product can be used as an intermediate coat on inorganic zinc silicate coatings. This product can also be re-coated with a wide range of Transocean coatings.
Transvinypox HS 206
This product is based on modified epoxy resin, which is designed to be used as an intermediate coat or sealer between primer and anti-fouling coatings in vessels. This paint, which is high solids, creates a level and strong coating system by increasing the adhesion of the substrate and the topcoat. This sealer is also suitable for re-coating by other Transocean topcoats.
Transpoxy Tar AA – 212
This product is based on epoxy resin modified by cooltar and is used for tanks, buried pipes, chains and ship anchors. The coating based on this paint has good chemical, corrosion and abrasion resistance. This paint is also compatible with steel and concrete surfaces.
Transpoxy Glascote – 440
This product is a high solid glass flake epoxy coating, which has high chemical and abrasion resistance. This product is formulated to repair and re-coat areas exposed to seawater with high rate of corrosion.
Transpoxy Materbond Aluminium – 466
This product is an anti-corrosive primer and contains aluminum flake. This high solid paint is based on epoxy resin and shows high corrosion and impact resistance. This product is suitable for applying on steel substrates and old coatings.
Transpoxy Solvent Free – 474
Solvent-free polyamine epoxy resin-based coating suitable for coating steel and concrete potable water tanks.
Transpoxy Intermediate – 219
This paint is a two-component product based on polyamide epoxy resin. This paint has good resistance to environmental conditions. This paint is designed as an intermediate coat between the primers containing zinc powder and the topcoat. This paint can be re-coated with all Transocean products.